|
HOME SOLUTIONS
Overviews
|
 |
TSUNAMI QUICKBRIDGE 20
Wireless Outdoor Bridge Tsunami QuickBridge 20 is a faster, easier, and more cost-effective alternative to leased lines, and 802.11b bridges-providing toll quality outdoor connectivity between buildings at distances of up to six miles. Faster Return on Investment Than Leased Lines Tsunami QuickBridge 20 eliminates the installation costs and recurring fees associated with standard T1 or E1 installations. As a leased-line replacement for a single T1/E1, it pays for itself in about a year. Payback period can further be reduced to less than 2 months when replacing multiple leased lines. And, with the addition of an optional T1 or E1 port, you can establish both voice and data connectivity between buildings and eliminate the recurring leased line costs. At 20 Mbps, Tsunami QuickBridge 20 provides data connectivity at nearly four times the actual throughput of comparably priced 802.11b bridging solutions, and more than five times the speed of a standard T1/E1 installation. At the same time, Tsunami QuickBridge 20 delivers up to 99.999% reliability - exceeding that of leased lines. And, because it is wireless and license-free, you can get connected without delay. Fast, Easy Installation Tsunami QuickBridge is the easiest-to-install outdoor bridge on the market - in can be installed in hours, not days. The solution includes two radio units with integrated antennas, and all of the necessary documentation, cables and mounting hardware. An antenna alignment tool and uses audible tones to ensure that the antennas are properly aligned before you leave the installation site. About the Tsunami Product Family The Tsunami family of Ethernet bridges provides wireless solutions that meet the growing demand for transparent and reliable high-speed network interconnectivity. In addition to Tsunami QuickBridge 20, the most cost-effective outdoor bridging solution available today, the Tsunami product line includes:
Technical Specs: Product Specifications
System: Capacity
QuickBridge 20 - 18 Mbps aggregate throughput QuickBridge 20 + T1/E1 - 12 Mbps aggregate data throughput, 3 Mbps/4 Mbps dedicated T1/E1 System Gain - 124 dB Maximum Distance - 6 miles/10 Km line of sight Transmit Output Power - +16 dBm max; +15 dBm typical Antenna - Integrated LHCP; 20dBi, 10ºazimuth by 10º elevation Maximum Receive Level -20 dBm error free Latency - 2.5 msec typical, 5 msec maximum Access Method - Time Division Duplex Modulation Technique - QPSK with equalization and FEC Security Key - 16 Character Security ID (Alphanumeric), authentication and PN transmission scrambling Compliance - US: FCC Part 15.247 ISM; Canada: IC RSS 210 Data Interface
Ethernet Interface - 10/100BaseT via AC power adapter Connector - RJ-45 female modular plug w/weather-protected shell Cable Type - CAT5 Compliance - IEEE 802.3 Digital Line Interface
T1 Digital Interface - Optional Channel via indoor external T1 multiplexer Connector - RJ-45 femaile modular jack Compliance - ANSI T1.403 E1 Digital Interface - Optional Channel via indoor external E1 multiplexer Connector - Balanced RJ-45 femaile modular jack, 8 pin Compliance - ITU-T Rec. G.703 Management
Local, Remote Access - QuickBridge Utility (Java-based GUI) for discovery, status and configuration Software Upgradeable - Over-the-air reprogramming Security - 2-level password access on Utility Power/Environment
AC Power - Adapter included, 110 VAC or 220 VAC, 450mA; Output: 24V DC, 1 Amp DC Power (to unit) - +18 to +28 VDC Power Connector - Power over Ethernet CAT5 cable RJ-45 connector Operational Temperature - -33º to 55º C Storage Temperature - -55º to 85º C Humidity - 5-100% condensing Altitude - Up to 10,000 ft Safety - UL 1950, EN60950 Wind Loading - 115 mph AC Power - Built-in AC power supply, 110/220 VAC, 1 Amp Operational Temperature - 0º to 50º C Humidity - Up to 90% non-condensing Physical Unit
QuickBridge Unit Size (WxHxD) - 10.5x10.5x7 inches 26.5x26.5x14.4 cm Weight - 10lbs /4.5kg Mounting (Installation) - Pole Mount 1.5-2.75"/ 3.08 - 6.98 cm O.D. (hardware included for 1.75"/ 4.4 cm O.D.) Shipping Configuration
2 QuickBridge Radio Units, 2 sets mounting hardware, 2 power adapters, 2 sets 50 meter CAT5 cable, 2 sets user documentation & utilities on CD-Rom, 2 external T1/E1 multiplexers on applicable SKUs Frequency Channel
Proxim Featured Products:
• Harmony • Tsunami QuickBridge 20 • Tsunami QuickBridge 60 • Tsunami Multipoint Wireless Ethernet Systems • Tsunami Wireless Ethernet Bridges Please contact us for information on other Proxim products. |
Featured Products
PDF DOWNLOADS
|
Data Sheet
